Coil Tubing Frac Head

The coil tubing frac Head protects coil tubing at surface from erosion while fracturing with coil in the well.

FeaturesCoil Tubing Frac Head

  • Wash on coil tubing is minimized with our patented design providing optimum protection on coil erosion
  • The connection configurations on both the top and bottom of the coil tubing frac head can accommodate many sizes and set ups depending upon customer requirements
  • It can be configured with two or four plug valves depending on the pumping rates required

Specifications

Pressure Rating:

  • 69 Mpa (10,000 psi) working pressure

Blast joints available in:

  • 4.0” (101.6mm)
  • 5.0” (127.0mm)

Coil Tubing Frac Head Schematic

Coil Tubing Frac Head Schematic

4” Blast Joint

Coil Tubing Frac Head Sxchematic 4inch blast joint

5” Blast Joint

Coil Tubing Frac Head Sxchematic 5 inch blast joint